How to clean a filter in a washing machine?

Intensive and prolonged operation of any equipment leads to its failure. Therefore, to ensure proper functioning, it is important to properly care for it and clean it regularly. But how to clean the filter in the washing machine, because few people even know where it is? Today we will tell you more about this.

How to remove a filter on a washing machine?

Today there is a washing machine in almost every apartment, but not every owner of it regularly cleans all the internal elements. However, such exploitation in the future leads to a deterioration in the quality of work and the appearance of other unpleasant problems - a violation of water waste and the appearance of a moldy smell.

One of the components most susceptible to clogging is the water drain pump. Many people think that it is located next to the drain hose, but in fact this is far from the case. In order to remove the filter on a washing machine, it is important to know its correct location.

Getting to this element is easy enough. It is located in almost all models of household appliances in the lower part of the case on the front side, and is hidden behind a plastic cover. It is fixed with latches, and to open the lid, you just need to press it firmly with your palm.

On some machines, it is bolted down, so you need a screwdriver to open the filter. That is why it is important to know. Because before buying, you should carefully look at the location of the pump for draining and the ease of its subsequent cleaning.

How to unscrew a filter in a washing machine?

Note! The drain filter is a plastic plug fixed to the inside of the device. It has a small notch on the outside for ease of use.

So how do you unscrew a filter in a washing machine? To do this, just scroll the "plug" from right to left, grasping the recess and unscrewing it until it comes out completely. But in some models of household appliances (for example, Hansa), the "plug" is additionally fixed with a special bolt. Therefore, a screwdriver may be required to remove the pump again.

Advice! Before cleaning the filter in the washing machine, it is important to know that during the operation of the device, excess water accumulates in the "plug", therefore, when unscrewing it, you should first place a container under the equipment to drain the liquid.

After unscrewing the element and collecting excess water, the hole should be thoroughly cleaned from dirt, which leads to a deterioration in the operation of the machine. This should be done carefully and carefully, after which you can proceed to the most crucial stage.

The filter element can be washed under running water to remove all impurities, and then screw it back on. Use a hard rag or brush for difficult, difficult-to-remove limescale.

Note! To prevent breakages and water leakage during operation, it is necessary to screw the filter element to the end so that it is tightly fixed. After that, you should check the strength of the fastening while the machine is in drain mode.

Simultaneously with cleaning the pump, it is advisable to check the condition and, if necessary, clean the water drain hose, which will significantly improve the operation of the equipment and prevent the rapid clogging of the filter element.

Possible problems

Sometimes there are situations when the pump cannot be removed from the device (this happens when the device is heavily soiled). In order to get the element, you will need to place the equipment on its side and unscrew the pump from the inside. This is not easy to do, which is why it is important to clean regularly to avoid such problems.