How to increase the computer RAM. Is it possible to increase the RAM without buying. Increase the RAM on the computer. What type of RAM is supported. What RAM is installed now

Owners of several outdated computers and laptops often complain that there is not enough RAM to run resource-intensive games or programs. But it plays one of the most basic roles in the system, since it is into it that additional application components are loaded in the form of dynamic libraries or parameter settings files. This is where you have to decide the question of how to increase the RAM on the computer (we will take "Windows 7" as an example of the operating system). An ordinary user can use several simple methods, which will be discussed later.

How to increase the RAM on the computer ("Windows 7" 64 bit) by the simplest method?

Let's start with stationary computer systems. As a rule, there are several slots on the motherboard for installing additional memory strips, and access to them is as easy as shelling pears, you just need to remove the side cover. With laptops, the situation is more complicated, although the proposed method can be used in them.

Actually, in the simplest case, the solution to the problem of how to increase the RAM on a computer ("Windows 7") comes down to buying brackets and installing them on the motherboard. True, here you need to take into account the type of supported memory, since it will be impossible to install modern-generation strips into old connectors, and if they are installed, they will not work. Moreover, they will also cause conflicts with the issuance of a blue screen (BSoD).

How to increase the RAM on the computer (Windows 7 32 bit) through optimization?

On the other hand, the question can be interpreted as its release by unloading unnecessary or unused modules. But the system itself (Windows 7x86) does not index the amount of RAM more than 3 GB, so the installation of additional strips is absolutely inappropriate.

To begin with, as a solution to how to increase the RAM on your computer ("Windows 7"), you can suggest disabling some startup items. To do this, use the msconfig configuration section in the Run console) with a switch to the startup tab. Ideally, you can leave only the ctfmon service, which is responsible for changing the language and displaying the language bar in the system tray.

You can also use the Programs and Features section in Control Panel, where you need to deactivate unnecessary operating system components (for example, disable the Hyper-V module or print service).

Virtual memory usage

Another technique that allows you to solve the problem of how to increase the RAM on your computer ("Windows 7") is to use the so-called virtual memory, for which the pagefile.sys paging file is responsible.

Usually, after installing the OS on a computer or laptop, by default, automatic determination of the required size of the above file is set, but it can be increased if desired. To do this, first you need to use the system properties section (RMB menu on the "My Computer" icon), then go to the additional parameters, in the system properties use the "Advanced" tab again, in the performance section, click the additional settings button and on one more on the tab "Advanced" use the button for changing the settings, which is located at the bottom right.

Now, in the virtual memory section, you need to uncheck the box for the automatic size selection, and just below you can set your own volume, which will be used when there is a shortage of main (RAM) memory. But here you need to clearly understand that it is not recommended to set too large a volume, since the access will be made to the hard disk on which the space is reserved, and it is much lower in speed than a similar access to RAM. In addition, sometimes there are situations when the system will primarily refer to virtual memory, and not to RAM.

Installing additional memory using external storage

Finally, let's see how to increase the RAM on a computer (Windows 7) with a USB flash drive. This, by the way, is one of the most common and most acceptable options. To do this, you can use the Ready Boost program from the developers of Microsoft Corporation. You can use USB devices, memory cards, and SSDs as media. But first, you should make sure that the media meets the requirements of the application itself (read and write speed, the presence of a minimum free space, etc.).

If all the conditions are met, connect the media and go through the RMB to the properties section. After installing the program, a special tab will appear in the window, on which you need to mark the line for providing a device for the Ready Boost technology, after which you can independently set the required cache size and save the changes.

BIOS options

And the very last way is to enter the primary BIOS when the computer boots up, find the Shared Memory or Video RAM parameters there. Then go to the menu and reduce the number of timings for the DRAM Read Timing settings.

The smaller the number, the higher the productivity. But you should not get carried away, since too low indicators can negatively affect the operation of the entire system.

Which one to prefer?

It seems that experimenting with BIOS settings is possible only as a last resort, but disabling unnecessary startup items, system components with the parallel use of removable media as cache devices, and even with system optimization, will suit all users, without exception. In this case, you don't even need to use virtual memory.

There are situations when, for one reason or another, it is necessary to increase the RAM on the computer. If you have seriously set yourself the goal of increasing the RAM of your PC, there are two ways for this: the first, with the help of a flash drive, and the second, with the purchase of RAM strips.

It goes without saying that buying a stick of RAM will add speed to your computer and give a noticeable increase in performance. However, if for some reason you cannot buy additional RAM, due to its high cost, or adding it to your PC seems to be very difficult for you, you can add memory using a flash drive.

It should be understood what the random access memory is used for - RAM and be aware of how it works. Random access memory is intended for temporary storage of certain data and instructions that are needed by the central processor in order to carry out computational operations - this is one of the most important elements for any computer. Since the amount of RAM directly affects the performance of a computer, accordingly, the more RAM, the higher its performance and speed, which is very important when working with programs that require high performance, as well as in computer games.

Buying RAM

To increase RAM you need what kind and type of RAM is installed on your computer. The fact is that the missing amount of memory on your device is replenished using the paging file, and it is much slower than RAM, so purchasing additional RAM to increase performance will be an ideal solution.

It should be understood that the 32-bit version of Windows has a maximum visible amount of RAM of 3.2Gb, and therefore more memory is not worth buying. If you have a 64-bit OS installed, then it "sees", depending on the version, from 8 GB to 192 GB in the Ultimate version.

In order to achieve faster memory performance, you should use the dual-channel mode - install an even number of RAM modules of the same size (2-4). If you have two RAM modules installed, they must be installed in slots 1 and 3 from the processor, you can buy and install two more brackets in slots 2 and 4. Before buying memory sticks, you should pay attention to the DDR, DDR2, DDR3 memory standard, as well as the memory frequency.

Because, if you do not take these indicators into account, the memory sticks may simply not fit, since they will be incompatible with each other. In addition, if you have a low frequency memory stick on your computer, buying a higher frequency memory will not give you a speed boost, since it will run at a low frequency. That is why, it is necessary that all memory strips on the device are of the same frequency, and then, the speed of its operation will increase significantly, and there will be a noticeable increase in computer performance.

Let's look at options for how to increase the computer's RAM in various ways.

4 Ways to Boost Your PC's RAM

Let's consider all the ways to increase RAM. Surely one of them will be useful to you.

Add an extra stick of RAM

The most convenient and easy way is to purchase an additional RAM module. If you have chosen this option, deciding not to bother with others, be prepared for the fact that to install the module you will have to "climb" into the system unit. But before that, it is necessary to consider several important criteria.

When buying, you should definitely pay attention:

How to install an additional stick of RAM in a computer

So, if you have purchased an additional RAM module, you can start installing it. For this:

1. Open the "Start" menu, click "Computer" and open the "Properties" with the right mouse button. All information about the computer will be displayed here, including how much memory it has. If the volume has increased, then we did everything right, if not, most likely, the module is simply not fixed. In this case, you need to disconnect the external devices from the system unit again, open it and check the module.
2. Open the "Start" menu, select "Task Manager" and go to the "Performance" section. The amount of memory should also be displayed here. If there is more of it, then everything is done correctly.

If you still did not manage to independently increase the RAM of your PC with the help of an additional module, you should first make sure that the module itself is in good working order and only after that contact a specialist for help with installation.
A new module is quite expensive, especially for some PC models, so you shouldn't rush to buy it. Perhaps the problem can be solved free of charge.

Add RAM using a USB stick

This method has been used recently, but it has already become one of the most effective and simple. It became possible to add memory in this way thanks to the introduction of ReadyBoost technology into operating systems. It is designed to connect a USB flash drive to a PC and use its memory for work. But in order for everything to work out, you need a flash drive with the following characteristics:

• size between 1 and 32 GB;
• speed not lower than 2.5 MB / s.

With Readyboost technology, you can connect several additional memory devices to your computer at once, but the size of the flash drive must be larger than the amount of RAM in the PC.

To add more memory to your computer using a USB flash drive:

• We connect it to the computer and go to the menu.
• Click on the connected device and click "Properties".
• We find an item called "ReadyBoost" and click "Provide this device for ReadyBoost technology."
• Set the required volume and click "OK".

Now there will be more memory and you can use it right away.

Increasing memory through the Windows paging file

During its operation, the computer uses the so-called virtual memory, which consists of random access memory (RAM) and a paging file. Windows uses this file to store the information necessary for the operation of programs, in the same way as RAM. This way of working with files is, of course, slower than loading into RAM, but if there is a shortage of the latter, it will help to unload it. The size of such a file is determined automatically by the operating system, but it can be increased if desired. This operation on Windows 7 looks like this:

• Open the "Start" menu.
• Click on "Computer" and select "Properties".
• A page with information about your computer will open. Here in the menu on the left side there will be a section "Additional system parameters". We open it.
• In the window that appears, first click the "Advanced" button, and then "Options" in the "Performance" section.
• A new window appears, where we select "Advanced" again, and then "Change" in the "Virtual memory" section.
• Uncheck the box next to "Automatically select the size of the paging file" and select the disk.
• We put a tick in front of "Specify size" and write the size larger than it was indicated.
• Click "OK"

Now the memory will be as much as you specified.

The operation of increasing memory using a paging file on Windows 8 and 10 is almost identical to Windows 7, but here you need to enter "Performance Settings" in the search bar of your computer, then click "Advanced". Then everything is done in the same way as in the "seven".

Using BIOS to Increase PC Memory

This method is not difficult, but you should not resort to it if you are not confident in your abilities.

So, to make the memory on the computer more:

• We go into the BIOS. This is done differently on different models. The most commonly used buttons are F2 or Delete. If they do not work, try looking for information on the network which button is for entering the BIOS for your PC.
• Find the item Video Ram or Shared Memory and click.
• Now we need to reduce the number of cycles in RAM. To do this, find the item Dram Read Timing. Keep in mind that lowering the cycles to a minimum will not affect the performance of the PC in the best way, so try to choose the optimal bar.
• We save the settings by pressing F10 and exit the BIOS.

If everything is done correctly, the PC memory will increase.

Thus, you can increase your PC's RAM on your own, and in several paid and free ways. Choose the one that suits you best and forget about running out of memory for a long time.

Hey guys! In this article I will tell you how to increase the computer's RAM. Recently I saw on the Internet such a service as a paid selection of RAM for your pc (computer). What for? That's why pay money if all the information can be found, say, on my blog? You probably already realized that you have come to the right place and you are very lucky.

Let's first think about why it is generally necessary to increase the computer's RAM. Some users do this because their computer has started to work very slowly (slow down), while others just want to play powerful new computer games that require a lot of memory. Let's first figure it out before increasing the computer's RAM, which one you have.

How to increase the RAM of your computer

Any computer, as well as a laptop, has special slots for random access memory (RAM) - the main storage device. There are such types of DDR1-2-3, as well as they are not related to each other in any way. Look, if you have a very old computer, for example, from 2005, then you have a DDR2 memory stick there anyway. And if you want to increase it, then you need to buy exactly the same bar, because DDR1 and DDR3 will not suit you, they simply will not fit into the slot.

When I didn’t understand computers yet, I inserted the wrong bar myself, turned on the computer and then burned the motherboard. Therefore, look carefully and install exactly the RAM you need. To find out what kind of RAM is on your computer, we need to download a special utility called CPU-Z. You can download it here at THIS LINK. And after we install the program, run it and go to the memory tab and look.

In the image you can see that in my case there is DDR3 memory (2 strips of 2GB each), you can see the information on the strips in the SPD tab. As you can see, I have a two-channel mode, that is, two similar strips of the same size. If you ask what kind of dual-channel mode it is, then this option increases the performance of the RAM by about 5%. Well, if you buy two strips of the same manufacturer and size, then it will generally be a GUD! I have one SAMSUNG bar and the other HYUNDAI. Look at the picture.

Please note that if your computer has a 32-bit operating system, Windows will not be able to see more than 3.2GB of memory. That is, if you have two 2GB slats, the computer will not see them anyway, but will only see 3.2. In this case, you need to install a 64-bit operating system.

How to safely install RAM on a pc

So you already know , and now let's move on to installing the planks, there are many nuances and let's analyze them. Before you are going to remove the old memory strip, I advise you to remove from the system unit static stress... This must be done so that nothing burns out. Touching the radiator (heating battery) with one hand, and with the other touch the system unit. Thus, you will remove all the statics that have gathered on the system unit.

Look, for example, in a silk sweater I do not recommend changing the RAM at all, because a lot of static is collected on the sweater. Have you noticed when you take off your sweater at night that there are many small sparks on it? This is the statistical tension, and it must be removed. After you have installed another memory stick or replaced the old one, you need it. This can be done by right-clicking on My Computer, which is located on the desktop and clicking Properties, and then below you will see how much RAM you have at the moment.

It seems like everyone else. I advise you to read how I increased wifi on my router, you can read it. And for those who have video slowdowns on the Internet, read here. That's all the guys, if my article helped you, please help me too, click on the social networks buttons, share this article with your friends. And if you still have questions, then ask them in the comments, and I will answer you.

Now you know how to increase your computer's RAM! Ask your questions in the comments, and do not forget to subscribe to new articles. To do this, enter your email at the end of the article.

From Uv. Evgeny Kryzhanovsky

How do I know if my computer's memory can be increased? The time comes when you begin to understand that the computer can no longer cope with its tasks, but this does not mean that you need to buy a new one, especially if your processor is only two or three years old. It all depends on the tasks that you perform on it. For example, to work with text, tables, surf the Internet, and even create a website, two gigabytes of memory and a single-core microprocessor like Pentium 4 and an integrated 512 gigabyte video card are enough.

On such a computer, even small office toys can be played. Of course, it's good to have everything in stock: memory, hard disk space and more cores in the microprocessor, but in computer technology, buying in reserve is an unjustified luxury.

Not only is such a stock very expensive and you will probably not need it soon, so computer technologies are advancing by leaps and bounds. And what was new and good yesterday may turn out to be completely unnecessary tomorrow. not only the amount of memory, hard drives, etc. changes, but also the ways of their connection (slots, sockets, connectors, cables).

Therefore, you will not install the latest memory strip in your old motherboard on the old slot (connector). The same goes for microprocessors. Every year they are produced for new connectors and new technologies. Better to buy a new computer in a couple of years.

We had a chief accountant at work, who every year demanded to buy her a new computer. Last year, she already got a quad-core fancy computer with 8 gigabytes of memory, four 2 terabyte hard drives, and a video card for powerful games. The same computer, only without a gaming video card, is installed as a proxy server for the Internet and a local network, which serves 200 computers in three districts.

And what do you think? This year our chief accountant again demanded a new computer. Allegedly, this fancy monster can no longer cope with its tasks. And he has only three tasks: working over the network in 1C, transferring data to the treasury and printing reports.

And just this year our leadership changed. Before that, there was a woman who understood little in computer technology and listened only to her deputies, including the chief accountant. So they demanded from her sophisticated office equipment. But in fact, they played all day long, watched films, listened to the radio via the Internet, made slideshows and photo albums to order. And they constantly complained that computers did not work well.

And so the boss calls me and asks what processor the chief accountant needs. I honestly told him that the computer that she bought last year for 65 thousand is needed only for powerful modern games or good graphics for printing, but not in our small company that deals only with monitoring and reporting.

Naturally, not only the management has changed, but also the entire accounting department and many deputy departments. As they say, a new broom - sweeps in a new way. The old chief accountant was retired, and the new one was bought a simple office computer for 15 thousand and the work "boiled". And the viruses all disappeared somewhere and the programs began to work well, and they stopped complaining about the programmers.

The former chief accountant's computer was given to us in the server room. We cleaned it out of a bunch of viruses, removed one hundred and fifty games from it and made it a multimedia server. We give people to watch movies and listen to music from the Internet at lunchtime.

Even an old computer can be made to run much faster if it is configured correctly, replaced with some parts and learned to work safely, i.e. do not download from the Internet, which is not, and periodically check your computer for viruses and third-party applications, from which even the most sophisticated computer starts to slow down and glitch.

Firstly, the computer may "slow down" due to the fact that you have never made a hard disk, or, through your own negligence, spyware or. Secondly, your hard drive may be full, and you need either a larger one, or everything you don't need.

How to find out,is it possible to increase memoryon my computer

In order to find out if it is possible to increase the memory on your computer, you must first find out the name or the name of yours. As you remember, this is the largest board in the computer, on which all other equipment is installed and connected.

How to determine your motherboard model

You can find out the name of your motherboard in several ways:

• In the instructions for the computer. When buying a computer, there must be instructions and a CD with drivers for all devices.
• On a box or disc to the motherboard. If you have already changed the motherboard, then you should have kept the box from it and the disk with the drivers.
• Open the case and read the name on the motherboard itself. If neither the disk nor the box has survived, then the motherboard itself must have its name.
• There is a special site on the Internet for identifying software and hardware on your computer. Click on the largest button and the file will be downloaded Intel Detection.exe... Run it and wait for the results. When Finish is written, you can close the program and go to the site page, where all the information about your computer will be. He did not determine my system (motherboard) board.

• We download the aida64 program from the Internet with free use for 30 days. , run the file exe and watch Computer-Summary Information.

I will write a separate article on this topic.

On this computer, I have 4 gigabytes of memory installed (two DDR2 gj 2 GB strips each with a frequency of 400 MHz). Now let's see if it is possible to increase the memory up to 8 GB. To do this, look in the program AIDA64 paragraph Motherboard(another name for motherboard) to the brackets. I have written Asus P5KPL-AM EPU.

We take this abbreviation and drive it into the search for your browser. Let's add the word characteristics to the name of our motherboard ( asus p5kpl-am epu specifications) and press the button Search.

We select any site with the characteristics of our board and read them. Go to the tab Characteristics and find information on RAM. Important to us Maximum memory size.

Maximum memory capacity 4 GB. So I can't add more memory.

If the motherboard supports dual-channel operation, then it is better to install not one, but two strips from the same batch. Then the memory will work twice as fast.