A useful craft is a do-it-yourself broom made from a plastic bottle. Unusual broom from plastic bottles with your own hands How to make a broom from plastic bottles

DIY plastic bottle broom: save the environment by giving a second life to plastic containers!

There are so many things around that surround people, which is just not in a modern house. And all this clogs not only the home, but also the environment. Few people realize that a second life, given to, say, a plastic two-liter water bottle, will not only help preserve nature, but also make a yard or, say, a kitchen cleaner. The proof of this will be this small master class on making a real broom from plastic bottles.

In order for everything to be done quickly, and the products came out of high quality, you need to prepare everything necessary for work. A broom will not work without these things and tools:

The bottle itself (from 10 pieces);
cutting;
wires;
hammer;
nail;
scissors;
knife
sewed.

So, the process begins with the preparation of the required number of bottles. After all, much will depend on where the broom will be used - on the street, in the house for wiping, for example, dust from remote places, and so on. In a word, at first the bottom of the plastic bottle is cut off. It is better to make an incision with a sharp knife, and continue with scissors.

The next step is cutting stripes that will play the role of twigs. Clearly, it's hard to believe that the broom will be tough. But their combination will give an excellent result. True, this is later, but for now, strips (half a centimeter wide) should be made with scissors so that the cuts do not reach the neck about six centimeters.

All selected bottles must be cut off the neck. This is a difficult process because the plastic is very hard at this point. Therefore, it is ideal to take two tools for work - a knife (very sharp) and scissors. That is, the first incision is made with a knife, then cutting off the necks continues with scissors. It is important to ensure that the knife does not slip, because it is so close to injury!

But one bottle of all selected for this purpose remains with a neck. For what? More on this below.

When the turn comes to putting on a bottle with a neck of the rest, which are without necks, you need to be more careful. That is, to put a bottle on a bottle in such a way that they are tightly threaded into each other. Perhaps, in the course of cutting the necks, it would be desirable to make cuts a little wider each time so that the bottle fits on the previous ones.

As a result, the blank pressed to the table by hand will look something like this.

From another plastic bottle, you need to separate the neck. But not at the very base, but retreating by 15 centimeters.

This part should be carefully and tightly put on top of all the bottles put on each other like nesting dolls.

Holes need to be made at two points on both sides of the bottles. An awl or something equally sharp is ideal for this role. Each layer must be pierced, but special care must be taken. After all, the procedure again becomes unsafe, since the awl can instantly slip off the slippery surface and injure the hand. Therefore, it is better to make a basting before this with something of a larger diameter, using a hammer.

Now, in the place where the holes were made with an awl on both sides, it is important to accurately get into them with a wire.

If the holes are made clearly, and each layer was pierced with something larger than the awl, then the wire will pass without difficulty. It remains only to twist its ends and bite off the excess with wire cutters.

In principle, the basis is ready. It remains to do the cutting. If there is no new, it does not matter. There are many broken tools, shovels, choppers or rakes on the farm. Therefore, having found a handle suitable for these purposes, you should try it on to the diameter of the neck of the bottle worn on top of all the others. If it suddenly doesn’t fit, it’s also not scary - a strict handle with a sharp knife, you can easily fit it and insert it.

But, if you do not nail the bottle to the handle, the broom will quickly become worthless. Therefore, armed with a hammer and a suitable carnation, you need to nail the neck to the handle. Here, by the way, the process will also be very difficult. Why? Because the neck is very dense at the base, as we already wrote, and the piece of wood (stalk) itself is also solid. That is, you need to break through two dense materials. Therefore, you also first need to make a mark with an awl or something that helped to pierce all the layers of the bottles, and hammer in a carnation (on the reverse side, also beat it, rounding the sharp one with a hammer).

Well, an unusual but cute whisk is ready to go! At any time, as soon as it fails, you can make a replacement for it by inviting all your household assistants. It’s faster and more valuable, because everyone worked together!

The final look of the craft.

Continuing the theme of crafts from plastic bottles, I would like to offer another work on making a plastic penguin with my own hands.

With the onset of spring, probably every gardener begins to think about cleaning up accumulated debris, litter and fallen leaves, remnants of old grass and other vegetation on the plot. In his assortment, as always: a pitchfork, a rake and a broom. Today we'll talk about the broom. More than one rural farmstead and city courtyard cannot do without it. Therefore, if you do not have such a unit, then you should definitely get it. The easiest way to purchase in a store for a few hundred of our rubles. And there is a slightly more difficult way. For example, make it from soft and elastic branches of twigs, flexible wood (elm, elm, birch, fir). Well, the most incredible one is to make it yourself from plastic bottles that are in every home. A good positive aspect of the latter method is respect for nature and the environment around us through the recycling of plastic waste. In this article, we will tell you how to make a broom out of plastic bottles.

Step-by-step instructions for creating a broom from bottles

So, let's get down to the question of how to make a broom out of plastic bottles step by step. To get started, we need the following materials:

Plastic bottles eight pieces with a volume of two liters. You can use more, in which case you get better bristles on the brushes and, as a result, there will be better debris capture,

Shank (suitable from an old shovel, chopper, rake or something else, if not, you have to purchase it at a hardware store),

Wire, hammer, nails, clerical knife, awl, clerical scissors and axe.

Progress:

If you do not know what to make a broom for the yard from, then use our information. When all the necessary tools are assembled at hand, you can get to work.

For all plastic eggplants, cut out the bottom with a clerical knife and cut with clerical scissors into strips along the neck of the eggplant. The width of the strip is half a centimeter, and the length, not cutting to the neck of the bottle, is six to eight centimeters.

At six eggplants, we cut out the neck with a clerical knife, and leave the seventh untouched with the neck, on which we string six eggplants without a neck.

At the eighth eggplant, we cut off the neck of 13-16 centimeters with clerical scissors and string it on seven bottles and pierce two symmetrical holes with an awl. We thread the wire into these holes and, on the other hand, carefully tighten the two ends of the wire.

We fit the handle into the neck, if it does not fit, you need to cut it with a hatchet along the diameter of the neck of the plastic bottle and fit it tightly so that you then need to take a hammer and a nail and pierce the neck of the bottle and thereby fix it on the handles.

That's all, our broom is ready, you can start working on it.

Another option for making a broom

Do you want to know how to make a broom at home? Then rather get acquainted with another version of the product. There is a more complicated version of a homemade broom, rather a brush broom. Nothing complicated is required to make it. First you need to get raw materials from the PET bottle with a bottle cutter, and then make a broom brush out of the tape.

And so let's start considering this option. We need:

• bottle cutter,
• fused tape from a PET bottle,
• construction adhesive 88,
• neck from a plastic eggplant (7 pieces),
• double sided twist
• lid from a plastic eggplant (7 pieces),
• screws seven pieces,
• curly screwdriver,
• a larger bar and a smaller bar with a small hole,
• cutting.

The main device here is a bottle cutter. There are many variations of drawings on the Internet that can be used in the manufacture of this product.

If not: a bar, a corner, a knife, an ax, then we will need 3 screws, a clerical knife blade, 4 nuts and 4 washers. You can use either one nut or one washer. And he drank off the boards or a piece of chipboard (which will be at hand) for the base on which it will all be attached. You need to take a screw (the length must be calculated so that it does not come out on the other side), put a washer on it, a knife from a clerical knife, a washer and a nut and screw it into the board, similarly, the second knife will simply rest against the screw between the washers.

Then the third screw is taken and fixed on top in the same way as the second one, and now the knife blade is not movable, you can try to extract the tape. To do this, exactly the bottom is cut off from the eggplant, and a small notch is made with scissors, after it is inserted into this notch, the blade smoothly scrolls, the tip of the tape comes out, they begin to gently pull on it. And after the eggplant, almost all of it turns into a ribbon, which then needs to be thermally processed. This can be done: on fire, or in water, or with a building hair dryer. So that it gives sediment and decreases in size.

After heat treatment, the tape has become more durable; it is cut into equal lengths of 25 centimeters, tightly stuffed and rammed, and the edges are aligned into prepared and sanded necks from eggplants in the amount of 7 pieces. We put on a double-sided twist on top, and pull out the neck.

While the edge is drying, let's move on to the second part of the broom-brush. It is necessary to take a bar and place 7 eggplant caps on it, then drill a hole in the middle and screw it with a self-tapping screw, and then double-sided necks with glued tapes from a PET bottle are screwed onto these caps. The main part of the brush broom is ready, now you need to take another smaller bar with a hole and screw it to the larger one with a broom, and insert and secure the handle.

The video will tell you more about making a broom:

You can try to take out the trash.

Finally

Then take the ribbons and (70 centimeters or 140 centimeters from the size of the broom that you will make) fold into two. Then a piece of a branch is inserted into the ribbon, which is even from a tree as thick as a finger for the rigidity of the handle, they begin to knit like an ordinary sorghum broom, only the ribbon from a plastic bottle replaces the willow twigs. The resulting screeds, knots and tapes are treated with fire or a building hair dryer to shrink the plastic and tighten. The result is a broom that is not inferior to the store. Plus, it will be durable.

We think the considered examples of a broom and a broom will help you in cleaning and cleaning up garbage: houses, yards and streets, and the proposed material will help to clean the environment from plastic containers (eggplants).

A broom is an indispensable tool in the household. With its help, you can remove not only debris, but also fallen leaves. You can make a broom yourself from improvised materials. The result is a handy tool for cleaning the backyard.

What will be required

A plastic bottle broom is very easy to make. Before starting work, it is worth preparing all the tools and materials. For manufacturing you will need:

1. Scissors.
2. Plastic bottles of 2 liters - 7 pieces.
3. Hammer.
4. Rod made of metal. This element is necessary for fixing the handle.
5. Wooden stalk. In this case, a round strong stick is suitable.

Material preparation

To make a broom out of a plastic bottle, you need to prepare the material. Containers should be thoroughly washed, removing labels and adhesive residues from them. One of the plastic bottles should be cut off with scissors. Its lower part must be cut into strips. The width of each should be from 1.5 to 2 centimeters. After that, the neck must be cut off from the workpiece.

To make the plastic bottle broom more fluffy, prepare three more containers as described above. One more preparation is required. However, you do not need to cut off her neck.

How to make a broom from plastic bottles

The master class on making a broom comes to an end. It remains only to assemble the product. To do this, you need to insert all the blanks into each other. Another bottle needs to cut off the top. After that, the workpiece should be put on a broom.

The same must be done with the 7th container. The resulting workpiece must be pierced in several places. The plastic bottle broom is almost ready. It remains only to fix the cut containers with metal wire, pulling it through the holes. Its ends should peek out from the back of the structure by about 3 centimeters.

Final stage

To make it convenient to use a broom from plastic bottles, you should equip it with a handle. In this case, it is recommended to use wood. It is best to take a cutting from an old shovel or rake. This part of the product should be inserted into the workpiece, and then fixed with a wire.

Now you know how it is done. However, do not forget that such a product has some disadvantages.

Disadvantages of bottle brooms

In some cases, a bottle broom is simply impractical. With its help it is very difficult to sweep the leaves from the lawn. The problem is that the plastic has an insufficient stiffness index. Of course, such a broom looks very original. However, it can only be used to remove large debris from the tracks.

Someone tries to make the material more rigid by heating it and straightening the twisted ends, while counting on the thermal shrinkage properties of the material. However, this procedure also fails. In addition, careless handling of fire can cause burns. In addition, the process of heating plastic blanks is a painstaking and boring job.

A whisk made of plastic bottles can last a long time. However, in its manufacture it is worth adhering to some recommendations:

1. To make a more reliable broom, you can use eight bottles with a volume of not more than 500 milliliters. The result is a small instrument. They can be collected in a pile and make a fluffy broom.
2. If you want to get a more original product, then use plastic containers of different shades. In addition, dark material is able to hide the attachment points.
3. To fix the blanks on the handle, you can use not only metal wire, but also nails.

A broom made from plastic bottles is the choice of people who care about the environment.

We are surrounded by many things everywhere, the house of a modern person is simply littered with them. It is noteworthy that they litter not only housing, but the entire environment. This is surprising, but by reusing, say, a plastic liter bottle, you can both save nature and make your room or, for example, yard cleaner. The proof of this statement is presented in the step-by-step lesson below for making a real panicle from plastic bottles.

For fast work and high-quality results, you need to get all the necessary things in advance. Making such a broom will not work without the following:

• bottles (more than 10 pieces);
• scissors;
• wires;
• knife
• cutting;
• hammer;
• nail.

To start the workflow, you need to get a certain number of plastic bottles. It mainly depends on the purpose, why the broom is needed and where it will be used, for example, for erasing dust, cleaning indoors or outdoors. So, first you need to cut off the bottom of the plastic bottle. The incision itself is made with a sharp knife and only then continues with scissors for convenience.

Next, you need to cut strips that will act as twigs. Only when they are connected can one achieve the rigidity required by any broom. But this will be later, now you need to cut such strips so that the cuts do not reach about six centimeters to the neck of the bottle. Their desired width should be about half a centimeter.

The next step is cutting off the necks of the bottles. This is not so easy, because in this place the bottle has the hardest plastic. As with cutting the bottom, it is best to use both a knife and scissors for this. You also need to cut the plastic with a knife, and continue with scissors. The process is quite dangerous, because if the knife slips off the bottle, you can get injured.

However, to make a broom, one bottle still needs to leave its neck. She will need to wear all the others. Care must be taken during this process. You should put the bottles on top of each other so that they are as tight as possible. To facilitate the task, when cutting the necks, you can make cuts wider and wider, then they will be better put on.

You need to take another bottle and cut off its neck, but lower than the rest - stepping back about 15 centimeters from the base. Then it must be put on as tightly as possible on all the bottles from above, this may resemble a nesting doll.

Parallel to each other on both sides, a hole should be made with something rather sharp, an awl is perfect. It is necessary to carefully pierce each layer, it is best to mark the holes in advance. If you are not careful, you can also get injured.

Next, you need a wire that must be threaded through the holes already made with an awl. If they are well made and they are wide, then this should not be a problem. If the holes are too narrow, then you should widen them with some sharp tool wider than the awl. Then all that remains is twisting the ends of the threaded wire and biting off the excess length with wire cutters.

This completes the manufacture of the base, but any broom needs a stalk. You can buy a new one, but everyone in the closet happens to have some broken garden tools. If the stalk found is too wide, it is easy to solve the problem - you can cut it enough with a knife and then insert it into bottles. Be sure to nail the neck to the handle with a nail so that the broom lasts longer.

Thus, a panicle useful in the household is ready for further use. If it breaks, you can simply replace it, because the process is quite fast.

A plastic container is a versatile material from which you can create many useful household items. In addition to their direct purpose - storing liquids - they make interesting and useful items, such as brooms.

A broom is an item without which it is very difficult to imagine cleaning an apartment or cottage. You can do it yourself. It only takes a few hours of free time, plastic bottles and a little inspiration.

What accessories are required?

The main advantage is that the creation of such a broom does not require a lot of money. Therefore, this option is perfect for those who like to save money. All the necessary components are in almost every home, which means that a trip to the store is not needed. The set of tools is quite simple, and even children are allowed to work with them.

So, to create a broom you will need:

• plastic bottles (preferably designed for 2 liters) - 5-8 pieces;
• a stick that will be a handle;
• some strong wire;
• nails / screws - 2 pieces;
• hammer / screwdriver;
• stationery knife;
• awl;
• scissors.

After all the necessary elements are collected in one place, you need to get to work.

Broom Making Technique

To make a broom with your own hands, it does not take much time. It is enough to allocate a few hours of free time, it may even be possible to complete the work ahead of schedule. Therefore, in this matter, everything is subjective.

The main rule is to follow the instructions and not jump from step to step. Work must be done carefully and with great care, which will allow the item to extend its operational capabilities. For convenience, there is a step-by-step instruction. It will allow you to do everything quickly and efficiently.

1. To begin with, the first bottle and a clerical knife are taken. With it, you need to cut off the neck, while it is important to retreat from the top by a few centimeters.

Important! The knife must be sharp and pre-sharpened. While working with it, it is imperative to observe safety precautions, especially if children are involved in it.

1. The bottom of the bottle is cut off in the same way.
2. Then scissors are taken - they will help to make rods or stems that make up any broom. The main task is to make these rods. The workpiece is cut lengthwise from top to bottom. The width of the strip should be within 0.5-1 centimeter. You don't have to cut it to the very end. Move a little above the middle. It is important to leave somewhere 5.5-6 centimeters on top.
3. The remaining plastic containers are processed in exactly the same way, only a few pieces should be left untouched.

Important! The more blanks there are, the more magnificent and thicker the broom will turn out to be. This will allow you to deal with pollution more efficiently.

1. After the work done, you need to take two untouched bottles and, without cutting off the neck, cut them into the same strips.
2. Previous fully cut bottles are inserted into the new blank.
3. The resulting part should be flattened to give it the desired shape.
4. The second untouched bottle is cut in half with a knife. It is desirable that she had a high neck.
5. Using scissors, two cuts are made to the middle of the bottle.
6. Put the finished part on a new part and fasten it with nails in two places in a horizontal plane.
7. Insert the stick into the neck and secure with wire.

The broom is ready to use.